B
V
I
K
L
M
Н
O
P
R
C
T
U
Ch
Order a call 8 800 333-58-60

Packaging machine TM-1P M2

    Video equipment overview

    Composition of the machine

    • TM-1P thermotunnel
    • TM-1P semi-automatic thermal knife
    • Reception roller conveyor with finished product cooling system

    Machine type

    • Semi-automatic machine

    Film type

    • Polyethylene (PE)

    Examples of packaged products

    Short Description

    The TM-1P M2 thermal packaging machine is designed for packing insulation, large-sized boxes, foam, coils of cables in shrinkable polyethylene film.

    Cost: 880 740 rubles.

    • Technical specifications
    • Additional options
    General characteristics of the machine
    Line capacity, unit/hour*
    360
    Dimensions of the machine assembly (LxWxH), mm
    7300х2250х2400
    Weight of the device, kg
    1200
    Climatic version according to GOST 15150-69
    UHL-4
    Type of thermal camera control unit/thermal knife
    Separate
    Characteristics of the thermal chamber
    Execution
    Module
    Overall dimensions in the working position (LxWxH), mm
    2500х1850х2200
    Net weight of the device, kg
    500
    Maximum power consumption, kW
    36,6
    Power supply parameters, V/Hz
    380/50
    Heating temperature adjustment range, °С
    20-220
    Conveyor dimensions (LxW), mm
    2500х1750
    Conveyor speed, m/min
    Adjustable 0-8
    Type of conveyor belt link
    Plate
    The working load on the conveyor is not more than, kg / m2
    50
    Camera length, mm
    1800
    Dimensions of the passage window of the chamber (WxH), mm
    1800х750
    Maximum dimensions of packaged products (LxWxH), mm
    1200х800х600
    Characteristics of the thermal knife
    Execution
    Module
    Overall dimensions (LxWxH) without film, mm
    2800х2250х2400
    Net weight of the device, kg
    500
    Length of the feeding table, mm
    1300
    Width of the feeding table, mm
    1800
    Dimensions of the working part of the thermal knife, mm
    1700
    Maximum width of the film, mm
    1450
    Air pressure in the pipeline, MPa (kg/cm2)
    0,4-0,6 (4-6)
    Welding type
    Permanent
    Number of heating elements (trimming, welding of the film)
    1
    Power consumption at the time of switching on, kW
    Continuous heating
    Characteristics of the receiving roller
    Dimensions of the receiving roller (LxW), mm
    2000х1500х1000
    Characteristics of the shrink film
    Type of Shrink film
    Polyethylene (PE)
    Type of film winding
    Canvas

    Painting in the customer's corporate colors + 10,000 rubles

    The manufacturer reserves the right to make changes in the construction and design of the product that do not impair its consumer properties.

    * — The productivity of the line depends on the size of the product and the speed of the operator.