B
V
I
K
L
M
Н
O
P
R
C
T
U
Ch
Order a call 8 800 333-58-60

Packaging machine TM-3 M1

    Video equipment overview

    Composition of the machine

    • TM-3 M1 handheld thermal knife
    • TM-3 M1 heat chamber

    Type of machine

    • Manual

    Film type

    • Polyethylene (PE)

    Examples of packaged products

    Short Description

    The TM-3 M1 thermal packaging machine (manual) is designed for packaging food, cosmetic or other products in glass, metal, paper or plastic containers.

    The difference between TM-3 M1 and TM-3 is a thermal chamber of enlarged dimensions and a floor roll holder.

    Cost: 252 000 rubles.

    • Technical specifications
    • Additional options
    General characteristics of the machine
    Line capacity, unit/hour*
    70
    Dimensions of the machine assembly (LxWxH), mm
    2800х1300х1730
    Weight of the device, kg
    260
    Climatic version according to GOST 15150-69
    UHL4
    Type of thermal camera control unit/thermal knife
    Single
    Characteristics of the thermal chamber
    Execution
    Module
    Overall dimensions in the working position (LxWxH), mm
    1200х1170х1730
    Net weight of the device, kg
    105
    Maximum power consumption, kW
    12,6
    Power supply parameters, V/Hz
    380/50
    Heating temperature adjustment range, °С
    20-220
    Conveyor dimensions (LxW), mm
    -
    Conveyor speed, m/min
    -
    Type of conveyor belt link
    -
    The working load on the conveyor is not more than, kg / m2
    -
    Camera length, mm
    1200
    Dimensions of the passage window of the chamber (WxH), mm
    900х400
    Maximum dimensions of packaged products (LxWxH), mm
    500х700х360
    Characteristics of the thermal knife
    Execution
    Module
    Overall dimensions (LxWxH) without film, mm
    1135х570х1000
    Net weight of the device, kg
    60
    Length of the feeding table, mm
    500
    Width of the feeding table, mm
    700
    Dimensions of the working part of the thermal knife, mm
    850
    Maximum width of the film, mm
    850
    Air pressure in the pipeline, MPa (kg/cm2)
    -
    Welding type
    Impulse
    Number of heating elements (trimming, welding of the film)
    3
    Power consumption at the time of switching on, kW
    0,6
    Characteristics of the shrink film
    Type of Shrink film
    Polyethylene (PE)
    Type of film winding
    Canvas

    Painting in the customer's corporate colors + 10,000 rubles

    The manufacturer reserves the right to make changes in the construction and design of the product that do not impair its consumer properties.

    * — The productivity of the line depends on the size of the product and the speed of the operator.