B
V
I
K
L
M
Н
O
P
R
C
T
U
Ch
Order a call 8 800 333-58-60

Automatic machine for filling liquids LRM-3000

Guarantee
  • Warranty period - 12 months

Description

The machine is designed for packing carbonated beverages into bottles made of polyethylene terephthalate (PET containers). The dosage of the product is carried out according to the level by the overflow method.

The installation is made in the climatic version of UHL. Placement category 4 according to GOST 15150-69 and is designed for operation at temperatures from +5 °C to +40 °C

Advantages:

  • Filling of drinking and carbonated water in PET containers with a volume of 0.33 to 2.0 liters;
  • The capacity of the device is from 2000 to 3000 bottles per hour (depending on the number of filling heads in the device);
  • It is possible to install from 8 to 12 filling heads;
  • The device is a linear type of equipment, which ensures that there are no delays in the supply and removal of bottles;
  • The liquid is dispensed at the filling level;
  • The device is serviced by one operator;
  • The device is made of stainless steel;
  • The device has a manual and automatic mode.
  • Technical Specifications
  • Video review
PET container volume 0,33-2,0
Bottle diameters, mm 60-100
Rated capacity (with a bottle volume of 1.0 liters), bout./hour1 3000
Number of filling heads 12
Temperature of the bottled product, °C from +4 to +10°C
Operating pressure of carbon dioxide at the inlet of the device, MPa, no more 0,4
Through section of the supply pipeline (DN), mm, not less than 40
Compressed air operating pressure, MPa 0,6-0,8
Air flow (at a pressure of 0.6 - 0.8 MPa), l/min, no more 250-300
Supply voltage, V 380
Power consumption, kW, max 0,3
Total weight, kg 140
Overall dimensions, mm
Length
Width
Height
1850
890
2550
Loading/unloading automatic
1 — Depending on the temperature, product pressure and flow sections (Dn) of the supply pipeline. Recommended product temperature +5°C; recommended pressure 0.3-0.4 MPa; DN-50mm. Differences in the flow section of more than 1/3 and right angles of the pipeline with a radius less than ZDu in close proximity to the entrance of the device are not allowed.