B
V
I
K
L
M
Н
O
P
R
C
T
U
Ch
Order a call 8 800 333-58-60

Liquid bottling machine LRMS-3000

Guarantee
  • Warranty period - 12 months

Description

The machine is designed for filling water and drinks with syrup into bottles made of polyethylene terephthalate (PET containers). The dosage of the product is carried out according to the level by the overflow method.

The machine is equipped with syrup glasses that dose the blend (syrup) directly into the bottles after pouring carbonated water.

A distinctive feature of this filling machine is the presence of separate syrup supply channels, which allows you to pour both drinking water and sweet carbonated water on the device without additional flushing of the product supply channels.

Advantages:

  • Filling of drinking, carbonated water and drinks with syrup in PET containers with a volume of 0.33 to 2.0 liters;
  • The capacity of the device is from 2000 to 3000 bottles per hour (depending on the number of filling heads in the device);
  • It is possible to install from 8 to 12 filling heads
  • The device is a linear type of equipment, which ensures that there are no delays in the supply and removal of bottles;
  • The liquid is dispensed at the filling level;
  • Separate syrup supply channels;
  • The device has a manual and automatic mode.
  • Technical Specifications
  • Video review
PET container volume 0,33-2,0
Bottle diameters, mm 60-100
Rated capacity (with a bottle volume of 1.0 liters), bout./hour1 3000
Number of filling heads 12
Temperature of the bottled product, °C from +4 to +10°C
Operating pressure of carbon dioxide at the inlet of the device, MPa, no more 0,4
Through section of the supply pipeline (DN), mm, not less than 40
Compressed air operating pressure, MPa 0,6-0,8
Air flow (at a pressure of 0.6 - 0.8 MPa), l/min, no more 250-300
Supply voltage, V 380
Power consumption, kW, max 0,3
Total weight, kg 140
Overall dimensions, mm
Length
Width
Height
1850
890
2550
Loading/unloading automatic
1 — Depending on the temperature, product pressure and flow sections (Dn) of the supply pipeline. Recommended product temperature +5°C; recommended pressure 0.3-0.4 MPa; DN-50mm. Differences in the flow section of more than 1/3 and right angles of the pipeline with a radius less than ZDu in close proximity to the entrance of the device are not allowed.