Liquid filling machine RMC-3000
Module description
The machine is designed for filling water and drinks with syrup into bottles made of polyethylene terephthalate (PET containers). The dosage of the product is carried out according to the level by the overflow method.
The machine is equipped with syrup glasses that dose the blend (syrup) directly into the bottles after pouring carbonated water.
A distinctive feature of this filling machine is the presence of separate syrup supply channels, which allows you to pour both drinking water and sweet carbonated water on the device without additional flushing of the product supply channels.
- Filling of drinking, carbonated water and drinks with syrup in PET containers with a volume of 0.33 to 2.0 liters;
- The capacity of the device is from 2000 to 3000 bottles per hour (depending on the number of filling heads in the device);
- It is possible to install from 8 to 12 filling heads
- The device is a linear type of equipment, which ensures that there are no delays in the supply and removal of bottles;
- The liquid is dispensed at the filling level;
- Separate syrup supply channels;
- The device has a manual and automatic mode.
Volume of PET containers | 0,33-2,0 |
Bottle diameters, mm | 60-100 |
Rated capacity (with 1.0 l bottle volume), bottles/hour | 3000 |
Number of filling heads | 12 |
Temperature of the spilled product, °C | от +4 до +10 |
Operating pressure of carbon dioxide at the unit inlet, MPa | 0,4 |
Feed pipe cross-section (DN), mm | 40 |
Working pressure of compressed air, MPa | 0,6-0,8 |
Air flow rate, l/min | 250-300 |
Supply voltage, V | 380 |
Power consumption, kW | 0,3 |
Total weight, kg | 140 |
Overall dimensions (DxHxV), mm | 1850х890х2550 |
Loading/unloading | Automatic |
CA-3000 capping machine
Module description
The machine is designed for sealing PET bottles (0.25-2L) with a screw plastic stopper.
The installation is an integral part of a set of equipment for packaging soft drinks in bottles.
It is made in the climatic version of UHL. Placement category 4 according to GOST 15150-69 and is designed for operation at temperatures from +5 ° C to +40 ° C.
- A wide range of types of corked bottles;
- The possibility of capping various types of lids thanks to the easy-to-change head;
- Reliable and gentle sealing of containers thanks to the Camozzi pneumatic system;
- The ability to adjust the twist force;
- The ability to adjust the speed of the capper.
<
Nominal capacity, bottles/hour | 3000 |
Working pressure of compressed air, MPa | 0,6-0,8 |
Air flow rate, l/min | 50 |
Supply voltage, V | 220 |
Power consumption, kW | 0,2 |
Total weight not more than, kg | 150 |
Overall dimensions (DxHxV), mm | 850х750х2020 |
Permissible defect percentage, % | 0,5 |
Elevator-orientator EO-3000
Module description
The elevator-orientator is designed for sampling the cap from the hopper, orientation and feeding it to the sample feeder.
The capacity of the hopper is up to 1500 pieces of plugs.
- Easy installation, easily integrated into any filling lines;
- Large volume of the hopper under the lid.
Rated capacity, caps/hour | 3000 |
Installed power, kW | 0,25 |
Overall dimensions (DxHxV), mm | 1250х600х2500 |
Weight not more than, kg | 120 |
Labeling equipment ETP-3000
Module description
Labeling equipment ETP-3000 is designed for applying a ring, polypropylene label to a gas-filled or non-carbonated PET bottle of cylindrical shape.
- Full automation of processes;
- Accurate and fast application of the label;
- Saving settings in the controller memory for a long time;
- Possibility of smooth adjustment of equipment performance;
- Performance at the level of modern requirements.
Productivity, labels/hour | 3000 |
Deviation from the parallelism of the label sticking is not more than, mm | ±2 |
Label size, mm: - length - width | 160-360 35-120 |
Film roll diameter, mm max. | 450 |
Bottle diameter, mm | 50-120 |
Installed power, kW | 3,5 |
Power consumption, kW | 2,7 |
Parameters of the pneumatic network - pressure, MPa - flow rate, l/min | 0,6-0,8 50 |
Adhesive consumption per 10000 labels, kg | 0,5 |
Power, V | 220/380±10% (3 phase) |
Overall dimensions (DxHxV), mm | 2000х1920х1480 |
Weight, kg | 250 |
Conveyor unit TR-12500
Module description
Transportation conveyors for bottles are used as part of automated lines for moving bottles in the horizontal plane.
It is a necessary element connecting blowing, filling, capping, labeling and thermal packaging equipment into a single chain.
- smooth adjustment of the belt speed;
- easy embeddability in the working line;
- high reliability and build quality;
- easy maintenance.
Overall dimensions (DxHxV), mm | 12500х110х900 |
Belt speed, m/min | 4-8 |
Belt width, mm | 82,5 |
Tape material | Plastics |
Base material of the conveyor unit | Stainless metal |
Power consumption, kW | 0,37 |
Weight, kg | 170 |
Voltage, V/Hz | 380/50 |
Thermal packaging machine TM-1A (300 mm)
Module description
Thermal packaging machine TM-1A (automatic machine) is designed for automatic batch shrink-wrapping of food, cosmetic or other products in glass, metal, paper or plastic containers.
Full automation simplifies the work of the operator and does not require direct participation in the process of the heat shrink wrapping machine.
Dimensions of the complete machine (LxWxH), mm | 5160x2800x2260 |
Required capacity of the line, units/hour | 600 |
Maximum dimensions of packaged products (DxHxV), mm | ? |
Machine weight, kg | 680 |
Type of thermowell/thermowell control unit | Separate |
Power supply parameters, V/Hz | 380/50 |
Heating temperature control range, °C | 20-220 |
Chamber length, mm | 1200 |
Dimensions of the chamber passage window (WxH), mm | 600х400 |
Product delivery direction | From left to right |
Welding type | Permanent |
The cost of the line: Check with your manager
Leave a requestThe production time is 45-50 working days