Packaging machine TM-2R M3

    Video equipment overview

    Composition of the machine

    • L-shaped handheld thermal knife
    • Heat chamber
    • Reception roller conveyor

    Machine type

    • Manual

    Film type

    • Polyvinyl chloride (PVC)
    • Polyolefin

    Examples of packaged products

    Short Description

    The main difference between TM-2P M3 and its predecessor TM-2P is that it is made by a single mobile unit, which makes it more mobile.

    Cost: 147 420 rubles.

    • Technical specifications
    • Additional options
    General characteristics of the machine
    Line capacity, unit/hour*
    300
    Dimensions of the machine assembly (LxWxH), mm
    2400х830х1450
    Weight of the device, kg
    150
    Climatic version according to GOST 15150-69
    UHL4
    Type of thermal camera control unit/thermal knife
    Single
    Characteristics of the thermal chamber
    Execution
    Module
    Overall dimensions in the working position (LxWxH), mm
    2500х830х1450
    Net weight of the device, kg
    50
    Maximum power consumption, kW
    4
    Power supply parameters, V/Hz
    220/50
    Heating temperature adjustment range, °С
    40-170
    Conveyor dimensions (LxW), mm
    1000х430
    Conveyor speed, m/min
    4
    Type of conveyor belt link
    Plate
    The working load on the conveyor is not more than, kg / m2
    30
    Camera length, mm
    600
    Dimensions of the passage window of the chamber (WxH), mm
    440х250
    Maximum dimensions of packaged products (LxWxH), mm
    580х370х210
    Characteristics of the thermal knife
    Execution
    Module
    Overall dimensions (LxWxH) without film, mm
    1000х680х1450
    Net weight of the device, kg
    50
    Length of the feeding table, mm
    500
    Width of the feeding table, mm
    400
    Dimensions of the working part of the thermal knife, mm
    600х400
    Maximum width of the film, mm
    550
    Welding type
    Impulse
    Number of heating elements (trimming, welding of the film)
    1
    Power consumption at the time of switching on, kW
    0,2
    Characteristics of the receiving roller
    Dimensions of the receiving roller (LxW), mm
    400х400
    Characteristics of the shrink film
    Type of Shrink film
    Polyvinyl chloride (PVC), polyolefin (POF)
    Type of film winding
    Half-sleeve

    Painting in the customer's corporate colors + 10,000 rubles

    The manufacturer reserves the right to make changes in the construction and design of the product that do not impair its consumer properties.

    * — The productivity of the line depends on the size of the product and the speed of the operator.